The ICP2 Production Quality In-Circuit (ICSP) Programmer is a cost-effective programmer that operates with a PC or as a standalone unit, and programs Microchip PIC/dsPIC MCUs, Keeloq, and serial EEPROMs. ICP2 is fully integrated into Microchip MPLAB.

With this Windows DLL is possible to control the ICP2 programmer with a command line. The DLL can be also integrated into a custom application to control all the programmer’s features.

This firmware upgrade enables the ICP2 programmer to support Microchip Keeloq encoders HCS300/301/362 and HCS360/361.

This firmware upgrade enables the ICP2 programmer to support Microchip dsPIC 16 bit family devices.

The ICP2GANG Production Quality In-Circuit Gang Programmer operates with a PC or as a standalone unit, and simultaneously (up to 64 channels) programs Microchip PIC/dsPIC MCUs, Keeloq, and serial EEPROMs. ICP2 is fully integrated into Microchip MPLAB.

With this Windows DLL is possible to control the ICP2GANG programmer with a command line. The DLL can be also integrated into a custom application to control all the programmer’s features.

This firmware upgrade enables the ICP2GANG programmer to support Microchip Keeloq encoders HCS300/301/362 and HCS360/361.

This firmware upgrade enables the ICP2GANG programmer to support Microchip dsPIC 16 bit family devices.

The PICFlash2 ICD is a USB programmer and in-circuit debugger for the Microchip PIC12F, PIC16F and PIC18F microcontrollers’ family. The PICFlash2 is driven and powered from the USB port; no additional power supply is needed.

The PICFlash2 Programming Adapter is an extension board for the PICFlash2 ICD programmer, which allows to program the DIP 8/10/14/18/28/40-pin PIC Microcontrollers.

The 18FJprog ICD is a USB programmer and in-circuit debugger for the Microchip PIC18FxxJxx microcontrollers’ family. The 18FJprog is driven and powered from the USB port; no additional power supply is needed.

The 18FJprog Programming Adapter is an extension board for the 18FJprog ICD programmer, which allows to program the PIC18FJ MCU cards.

The dsPICprog ICD is a USB programmer and in-circuit debugger for the Microchip dsPIC30F microcontrollers’ family. The dsPICprog ICD is driven and powered from the USB port; no additional power supply is needed.

The LV24-33prog ICD is a USB programmer and in-circuit debugger for the Microchip PIC24 and dsPIC33 microcontrollers’ family. The LV24-33prog ICD is driven and powered from the USB port; no additional power supply is needed.

The LV24-33prog Programming Adapter is an extension board for the LV24-33prog ICD programmer, which allows to program the PIC24 and dsPIC33 MCU cards.

The AVRprog2 is a USB in-circuit programmer for the Atmel AVR microcontrollers’ family. The AVRprog2 is driven and powered from the USB port; no additional power supply is needed.

The 8051prog2 is a USB in-circuit programmer for the Atmel 8051 microcontrollers’ family. The 8051prog2 is driven and powered from the USB port; no additional power supply is needed.

The PSOCprog2 is a USB in-circuit programmer for the Cypress PSoC microcontrollers’ family. The PSOCprog2 is driven and powered from the USB port; no additional power supply is needed.

The ARMflash is a USB in-circuit programmer for the NXP ARM microcontrollers’ family. The ARMFlash is driven and powered from the USB port; no additional power supply is needed.

The ARMFlash Programming Adapter is an extension board for the ARMFlash programmer, which allows to program the ARM MCU cards.