Eddy 2.1 CPU is a high-performance embedded CPU module with ARM9 processor, 8MB Flash and 32MB SDRAM. It’s features include 16 bit address and 8 bit data bus interface, Ethernet, 56 GPIO and customized real time embedded Linux, Lemonix.

The GK7000-WBP is an industrial control PC with Windows CE 5.0. The GK7000-WBP is powered by a 400MHz ARM9 processor with 64MB flash, 128MB SDRAM, and 7" TFT display with touch. The Wi-Fi adapter, the battery and the power supply are included.

Eddy-WiFi 2.1 is 802.11a/b/g Wi-Fi module, designed to be hosted on the Eddy-CPU 2.1 or as a standalone Wi-Fi module for any host processor. The Eddy-Wi-Fi module supports MIMO technology, WEP, WPA, and WPA2. The package includes the Wi-Fi antenna.

The GK7000-W is an industrial control PC with Windows CE 5.0. The GK7000-W is powered by a 400MHz ARM9 processor with 64MB flash, 128MB SDRAM, and 7" TFT display with touch. The Wi-Fi adapter is included, the battery and the power supply are optional.

Netus G20 is a tiny 4x4cm Linux-ready module based on the new 400MHz ARM9 CPU from Atmel (AT91SAM9G20). The Netus G20 includes 64MB SDRAN, 8MB Flash, LAN, USB, I/O and many other powerful devices, making it perfect for any Embedded Linux application.

Eddy 2.1 Development Kit provides an easy testing and evaluation environment for Eddy 2.1 applications. The development kit includes all the hardware peripherals supported by the Eddy-CPU, as well as the complete Lemonix software development environment.

The GK7000 is an industrial control PC with Windows CE 5.0. Easy to attach to any panel, the GTK7000 is powered by a 400MHz ARM9 processor with 64MB flash, 128MB SDRAM, and 7" TFT display with touch. Wi-Fi adapter, battery and power supply are optional.

The GK7-WiFi is a USB (1.1) 802.11b/g WiFi adapter designed for the GK7000 so compatible with Windows CE 5.0.

Eddy-S4M/PIN 2.1 is a high-performance embedded device server. This compact-size module supports 3 USB 2.0 ports, 2 RS232 ports, 2 RS485/422 ports, microSD interface, WDT & RTC, up to 34 programmable GPIO pins, and customized real time embedded Linux.

The GK7-B is a 3,7V - 2200mA rechargeable battery designed for the GK7000 Windows CE industrial PC. The battery is automatically recharged once the GK7000 is connected to any power source.

Set of female and male SMD connectors with 60-pin, 0.8mm pitch, designed to host the Netus G20 on a host board.

Eddy-S4M/DK provides an easy testing and evaluation environment for Eddy-S4M/PIN 2.1 applications. The development kit includes all the hardware peripherals supported by the Eddy-S4M/PIN, as well as the complete Lemonix software development environment.

The GK7-PS is a 10V - 2000mA switching power supply, designed to power-up the GK7000 and recharge the optional battery.

The Netus PS1 includes all the circuitry needed to power-up the Netus G20 module, giving the three required voltages (1.0/1.8/3.3 V) in the required power-up and power-down sequences.

Eddy 2.0 CPU is a high-performance embedded CPU module with ARM9 processor, 8MB Flash and 32MB SDRAM. It’s features include 16 bit address and 8 bit data bus interface, Ethernet, 16 GPIO and customized real time embedded Linux, Lemonix.

The FOX/NETUS-G20-DK includes all you need to develop with the FOX G20 and Netus G20. The kit includes: FOX Board G20, Netus G20 and connectors, uSD 2GB with Gentoo, consolle USB adapter, FOX Proto-1 and connectors, FOX case, power supply.

Eddy Development Kit provides an easy testing and evaluation environment for Eddy applications. Before integrating Eddy to user’s hardware, applications are first programmed and tested on the development board.

The FOXG20-DK includes all you need to develop with the FOX G20. The kit includes: FOX Board G20, uSD 2GB with Gentoo, consolle USB adapter, FOX Proto-1 and connectors, FOX case, power supply.

Eddy-S1/PIN 232 is a high-performance embedded device server. This compact-size module supports RS232 serial interface up to 921.6Kbps, 4 programmable GPIO pins, and customized real time embedded Linux, Lemonix.

The FOX Board G20 is an Embedded Linux SBC which uses the Netus G20 (Atmel AT91SAM9G20 CPU - ARM9, 400MHz, 64MB SDRAM, 8MB FLASH) core. The FOX G20 includes many on-board peripherals: uSD reader, 1 Ethernet, 2 USB 2.0, RTC, 2 serial ports, and 80 GP I/O.

Eddy-S1/DB9 232 is a high-performance embedded device server. This compact-size module supports RS232 serial interface up to 921.6Kbps (with DB9 connector), and customized real time embedded Linux, Lemonix.

2GB microSD card with preinstalled Debian rootfs on ReiserFS filesystem. Note: this card contains Open Source code released under GPL licence, so you buy the memory card only not the content that is copyright by SPI Inc.

The Debug Port Interface (DPI) is a TTL (3.3V) to USB converter designed to connect the FOX Board G20/LX console port (J10) to a standard USB port, getting full access to the Linux console. The DPI uses a standard FTDI chip to convert from TTL to USB.

Eddy-S1/DB9-PoE 232 is a high-performance embedded device server. This compact-size module supports RS232 serial interface up to 921.6Kbps (with DB9 connector), PoE (Power on Ethernet) module on-board, and customized real time embedded Linux, Lemonix.

The EPS (Extended Power Supply) is a switching power supply module (uses the TI TPS54231) designed to extend the supply voltage range of the FOX Board G20 (7 to 28 VDC) but can be also used for many other applications.

Eddy-S1/PIN Combo is a high-performance embedded device server. This compact-size module supports RS485 and RS422 serial interfaces up to 921.6Kbps, 4 programmable GPIO pins, and customized real time embedded Linux, Lemonix.

The PS5V1A is a switching power supply which offer a connector designed for the Fox Board. Input 100-240VAC 50/60Hz, output 5VDC/1A.

Eddy-S1/DB9 Combo is a high-performance embedded device server. This compact-size module supports RS485 and RS422 serial interfaces up to 921.6Kbps (with DB9 connector), and customized real time embedded Linux, Lemonix.

The FOX Proto-1 is a high quality fiberglass through-plated PCB with same size of the FOX Board G20. The FOX Proto-1 can be mounted on the top of the FOX Board G20, giving extra space that can be used to add extra components.

The FOX Proto-2 is a high quality fiberglass through-plated PCB with Eurocard size (100x160mm). The FOX Proto-2 can host the FOX Board G20, giving extra space that can be used to add extra components.