The uOLED-96-G1 is a 0,96" Passive OLED (PMOLED) display module, 96x64 resolution, 65K true-to-life colors, with embedded Goldelox graphic processor. The module is designed to operate under two different software platforms: SGC serial command or GFX (4D Graphics Language).

uOLED-96-G1 main features:

• 0,96" diagonal size.
• 96x64 resolution.
• 65K true-to-life colours.
• Display active area: 20x14 mm.
• PMOLED screen (no backlighting required, near 180° viewing angle).
• Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET.
• Serial RS-232 (0V to 5V) with auto-baud feature (300 to 256K baud).
• 2 different operating platforms:
  • SGC the Serial Command platform (factory default).
  • GFX the 4DGL (4D Graphics Language) platform.
• On-board micro-SD memory card slot for storing data (memory card not included).
• 4.0V to 5.5V range operation (single supply).
• Module size: 32,7 x 23,0 x 4,9 mm.

SGC/GFX platforms.
The module is delivered by default with the SCG firmware pre-installed. It is very quick and easy to switch from one platform to another by simply programming the module with the appropriate firmware (pmmc) using the freely available PmmC Loader software tool.

Please note that the PmmC configuration has an impact on which hardware features of the module are available for use. For a full list of features available in SGC or GFX configuration, please refer to the respective datasheet.

• SGC (serial commands platform).
  The serial command platform allows the display module to be used as a slave device connected to an external host. The host can be any controller, where all screen related functions are sent using a simple protocol via the serial interface.
• GFX (4DGL platform).
  4DGL is a graphics oriented language allowing the developer to write applications in a high level language and run it directly on the Goldelox or Picaso processor embedded in the display module. The rich set of built-in library functions allows the user to take complete control of all available hardware resources.

Software Tools.
4D Systems provides a number of useful, free and easy-to-use software tools for testing and development. All software tools are available here. 4D Systems updates the software and the firmware often. We strongly recommend always updating to the latest version to have access to newest features and stability.

NOTE
PmmC or 4DGL programming should only be carried out using any one of the 4D Programming modules (4D Programming Cable, uUSB-MB5, uUSB-CE5). Any malfunction because of custom or third party USB to Serial converters or Serial (RS232) to Serial (TTL) level converters will void the warranty.