Add-On Boards
Subcategories
BarGraph Click (Mikroelektronika)
A ten-segment light bar display in mikroBUS format. It communicates via SPI bus and PWM with any Host board.
This board is an excellent choice for a VU meter design. You can even interconnect many to form a LED stripe.
• Price: € 11,00
• Stock: Available in stock
Pressure click (Mikroelektronika)
The Pressure Click features an LPS331AP digital output pressure sensor. It has a 260 to 1260 mbar absolute pressure range and draws only 30μA at maximum. The High-resolution mode delivers high precision at 0.020 mbar RMS.
• Price: € 19,50
• Stock: Available in stock
ADC Click (Mikroelektronika)
The ADC Click is build around the MCP3204 which features 12-bit ADC with 4 inputs (with screw terminals), 50k samples/s and low-power consumption. Board uses SPI interface and it is set to use 3,3V power supply by default. Can be set to 5V systems, too.
• Price: € 22,00
• Stock: Available in stock
Bluetooth Click (Mikroelektronika)
The Bluetooth Click is a fully qualified, class 1, Bluetooth 2.1 module for mikroBus form factor. The board features: low power (30mA), high data rate (up to 300Kbs), UART (SPP or HCI) data connection interface. It uses 3,3V power supply only.
• Price: € 37,00
• Stock: Available in stock
DIGIPOT Click (Mikroelektronika)
The DIGIPOT Click is an accessory board in mikroBus™. It features a single-channel digital potentiometer MCP4161 with 8-bit resolution and SPI interface. The resistance value of the DIGIPOT goes up to 10 kΩ and it can be used both 3,3V and 5V systems
• Price: € 15,00
• Stock: Available in stock
ETH Click (Mikroelektronika)
The ETH Click for mikroBus features the Microchip ENC28J60 a 28-pin, 10BASE-T standalone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. The board is designed to use 3,3V power supply only.
• Price: € 21,00
• Stock: Available in stock
microSD Click (Mikroelektronika)
The microSD Click provides an easy way to add microSD (Micro Secure Digital cards) socket to mikroBus. The board includes the microSD socket as well as all the passive components. Board is designed to use 3,3V power supply only
• Price: € 14,00
• Stock: Available in stock
RS485 Click 5V (Mikroelektronika)
RS485 Click 5V is an accessory board in mikroBus. It allows high speed bidirectional data communication on multipoint bus transmission lines. It complies with EIA standards RS-485 and RS-422. The board operates on 5V power supply only.
• Price: € 16,00
• Stock: Available in stock
BUZZ Click (Mikroelektronika)
The BUZZ Click is an accessory board in mikroBus. The Board features a piezo speaker capable of emitting audio signals. Buzzer’s resonant frequency is 3,8kHz. The board is set to use 5V power supply by default but it can be used with 3,3V systems, too.
• Price: € 8,00
• Stock: Available in stock
MP3 Click (Mikroelektronika)
The MP3 Click is an accessory board in mikroBus form. A stereo MP3 decoder chip VS1053 can decode and encode multiple formats. It uses SPI interface and can only use 3,3V power supply. The board features stereo headphone and microphone audio connectors.
• Price: € 19,00
• Stock: Available in stock
RTC Click (Mikroelektronika)
The RTC Click is a real-time clock board using mikroBus form factor. It features the PCF8583 serial real-time clock with a 3V/230mA lithium battery as a backup. The board is set to use 3,3V power supply by default but it can be used in 5V systems, too
• Price: € 19,30
• Stock: Available in stock
RTC2 Click (Mikroelektronika)
The RTC2 Click is a real-time clock board using mikroBus. It is full BCD with programmable square-wave output signal. It features the DS1307 serial real-time clock with a 3V/230mA lithium battery as a backup. The board can only use 5V power supply.
• Price: € 19,00
• Stock: Available in stock
SHT11 Click (Mikroelektronika)
The SHT11 Click is a digital humidity and temperature sensor in mikroBus form. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. It can be used both 3,3V and 5V systems.
• Price: € 23,50
• Stock: Available in stock
DAC Click (Mikroelektronika)
The DAC Click is an accessory board in mikroBus™ form factor. The board featuring the Microchip MCP4921 12-bit digital-to-analog converter with SPI interface. The board is set to use 3,3V power supply by default and it can be used with 5,0V systems, too.
• Price: € 16,00
• Stock: Available in stock
EXPAND Click (Mikroelektronika)
It is a 16-bit I/O expander accessory board in mikroBus with SPI clock speeds up to 10MHz. Three jumpers allow you to configure board address and connect up to 8 devices on the bus. It supports interrupt-on-change feature and can be used 3,3/5V systems.
• Price: € 10,50
• Stock: Available in stock
Bee Click (Mikroelektronika)
The Bee Click is an accessory board in mikroBus. It features 2.4 GHz IEEE 802.15.4 radio transceiver module MRF24J40MA, with integrated PCB antenna and matching circuitry. Board is designed to use 3,3V power supply only.
• Price: € 26,00
• Stock: Available in stock
RS485 Click 3,3V (Mikroelektronika)
RS485 Click 3,3V is an accessory board in mikroBus. It allows high speed bidirectional data communication on multipoint bus transmission lines. It complies with EIA standards RS-485 and RS-422. The board operates on 3,3V power supply only.
• Price: € 16,00
• Stock: Currently out of stock. Available 5/7 days after order.
LightHz Click (Mikroelektronika)
LightHz Click is an accessory board in mikroBus, featuring TSL230BR programmable light-to-frequency converter. The output can be either a pulse train or a square wave. Device sensitivity is selectable in three ranges and it can be used 3,3/5V systems.
• Price: € 15,50
• Stock: Available in stock
CAN SPI Click 3,3V (Mikroelektronika)
The CAN SPI Click 3,3V is an accessory board in mikroBus to add CAN connectivity to your microcontroller with SPI. Board features SN65HVD230 circuit which provides CAN serial communication physical layer in accordance with the ISO 11898 standard.
• Price: € 19,00
• Stock: Currently out of stock. Available 5/7 days after order.
IR Click (Mikroelektronika)
The IR Click features the TSOP38338 IR receiver and the QEE113 IR emitting diode connected via UART interface. The 38 kHz receiver carrier frequency is recommended for RCMM, NEC, RC5, RC6, r-step and XMP codes. The board can be powered up at 3.3V and 5V.
• Price: € 8,50
• Stock: Available in stock
CAN SPI Click 5V (Mikroelektronika)
The CAN SPI Click 5V is an accessory board in mikroBus to add CAN connectivity to your microcontroller with SPI. Board features MCP2551 circuit which provides CAN serial communication physical layer in accordance with the ISO 11898 standard.
• Price: € 19,00
• Stock: Available in stock
GPS Click (Mikroelektronika)
The GPS Click is an accessory board in mikroBus form factor with high performance u-blox 6 positioning engine, LEA-6S. It can be interfaced with a microcontroller through UART or I2C connection, or USB connection. It running on 3,3V power supply only.
• Price: € 42,00
• Stock: Available in stock
GPS2 Click (Mikroelektronika)
The GPS2 Click is a mikroBus board featuring the Quectel L30 GPS module. The advanced jamming suppression mechanism and the innovative RF architecture ensure maximum GPS performances for any location, navigation, and industrial autonomous applications.
• Price: € 38,00
• Stock: Currently out of stock. Available 5/7 days after order.
GPS-L10 Click (Mikroelektronika)
The GPS Click L10 is an accessory board in mikroBus form factor with high performance MTK positioning engine, Quectel L10. It can be interfaced with a microcontroller through UART, I2C connection, or USB connection. It runs on 3,3V power supply only.
• Price: € 41,00
• Stock: Available in stock
WiFi Plus Click (Mikroelektronika)
The WiFi PLUS Click is an accessory board in mikroBUS form factor. It features MRF24WB0MA, 2.4GHz, IEEE std. 802.11 compliant module as well as MCW1001 companion controller with on-board TCP/IP stack and 802.11 connection manager. It use 3,3V power only.
• Price: € 41,20
• Stock: Available in stock
IrDA2 Click (Mikroelektronika)
The IrDA2 Click is an accessory board in mikroBUS form factor. It features the MCP2120 infrared encoder/decoder placed between the UART and infrared (IR) optical transceiver and it can be used both 3,3V and 5V power supplies.
• Price: € 24,00
• Stock: Available in stock
Accel Click (Mikroelektronika)
The Accel Click is an accessory board in mikroBUS form factor. It features ADXL345 3-axis accelerometer module with ultra-low power and high resolution (13-bit) measurement supporting several sensing functions. The board is designed to use 3,3V power.
• Price: € 17,40
• Stock: Available in stock
OPTO Click (Mikroelektronika)
The OPTO Click is an accessory board in mikroBUS form factor. It features two VO2630 dual channel, high speed optocoupler modules enabling high speed data transfer between input and output. The board can be operated both 3,3V and 5V power supplies.
• Price: € 19,40
• Stock: Available in stock
Gyro Click (Mikroelektronika)
The Gyro Click is a mikroBus board featuring the L3GD20 three-axis digital gyroscope capable of providing the measured angular rate, as well as ambient temperature. The Gyro Click communicates with the host microcontroller via mikroBUS SPI or I2C.
• Price: € 22,00
• Stock: Available in stock
Thermo click (Mikroelektronika)
The Thermo Click is an accessory board in mikroBUS form factor. It features MAX31855K thermocouple-to-digital converter as well as PCC-SMP connector for K-type thermocouple probes. The board is designed to use 3,3V power supply only.
• Price: € 26,90
• Stock: Available in stock
Language
Shopping cart
Your cart is empty.
Need help?
Click here to view our F.A.Q. page or feel free to submit your question through our contact form.
Social Media
Newsletter
Subscribe to our regular newsletter and stay informed about all of our latest offers.Shipment and Payment
Payment Methods
We accept Wire Transfer, VISA, MasterCard and PayPal. For security reasons we do not handle credit card details directly. All credit card payments are handled by a secure third party provider - Wirecard.
Shipping
By default we ship with DHL and FEDEX (insured shipment). For shipment costs to your country please check here.
Prices
All listed prices exclude Value Added Tax (VAT) and shipping cost. Customers outside the EU or companies within the EU with a valid VAT number are exempt from VAT. Companies based in Austria and private persons will have 20% VAT added to the prices at checkout.