Acme systems
Acme Systems product range is focused on low-cost and hi-performance Embedded Linux Devices. Acme Systems’s FOX Board is a “ready-to-run” Embedded Linux System, perfect to create mini WEB servers, network devices, TCP/IP gateways or CPU units for OEM embedded devices. A fully Open Source environment is freely available to build custom kernel images or to develop user applications using standard GNU tools.
Acme systems product categories:
FOX Board G20 (Acme systems)
The FOX Board G20 is an Embedded Linux SBC which uses the Netus G20 (Atmel AT91SAM9G20 CPU - ARM9, 400MHz, 64MB SDRAM, 256KB FLASH) core. The FOX G20 includes many on-board peripherals: uSD reader, Ethernet, 2 USB 2.0, RTC, 2 serial ports, and 80 GP I/O.
• Price: € 139,00
• Stock: Available in stock
CR1220 Lithium battery (Acme systems)
Lithium battery model CR1220 (3V) for the FOX Board G20 RTC circuitry backup.
• Price: € 3,00
• Stock: Available in stock
uSD-2G-Debian (Acme systems)
2GB microSD card with preinstalled Debian rootfs on ReiserFS filesystem. Note: this card contains Open Source code released under GPL licence, so you buy the memory card only not the content that is copyright by SPI Inc.
• Price: € 15,00
• Stock: Currently out of stock. Available 5/7 days after order.
Debug Port Interface (Acme systems)
The Debug Port Interface (DPI) is a TTL (3.3V) to USB converter designed to connect the FOX Board G20/LX console port (J10) to a standard USB port, getting full access to the Linux console. The DPI uses a standard FTDI chip to convert from TTL to USB.
• Price: € 15,00
• Stock: Available in stock
EPS (Acme systems)
The EPS (Extended Power Supply) is a switching power supply module (uses the TI TPS54231) designed to extend the supply voltage range of the FOX Board G20 (7 to 28 VDC) but can be also used for many other applications.
• Price: € 15,00
• Stock: Available in stock
FOX Proto-1 (Acme systems)
The FOX Proto-1 is a high quality fiberglass through-plated PCB with same size of the FOX Board G20. The FOX Proto-1 can be mounted on the top of the FOX Board G20, giving extra space that can be used to add extra components.
• Price: € 6,00
• Stock: Available in stock
FOX Proto-2 (Acme systems)
The FOX Proto-2 is a high quality fiberglass through-plated PCB with Eurocard size (100x160mm). The FOX Proto-2 can host the FOX Board G20, giving extra space that can be used to add extra components.
• Price: € 8,00
• Stock: Available in stock
STRIPM2x206MM (Acme systems)
Set (2 pieces) of socket: male, 2x20, pin height 6mm.
• Price: € 1,00
• Stock: Available in stock
STRIPF2X206MM (Acme systems)
Set (2 pieces) of socket - female - 2x20 - height 0,6mm.
• Price: € 1,00
• Stock: Available in stock
STRIPM2x2012MM (Acme systems)
Set (2 pieces) of socket: male, 2x20, pin height 12mm.
• Price: € 1,00
• Stock: Available in stock
FOX Case (transparent) (Acme systems)
FOX Case is a transparent, stackable plastic enclosure (PVC) designed to hold the Acme Systems Linux FOX Board LX816/832 plus an extra board.
• Price: € 10,00
• Stock: Available in stock
FOX Case Black (Acme systems)
FOX Case is a black, stackable plastic enclosure (PVC) designed to hold the Acme Systems Linux FOX Board LX816/832 plus an extra board.
• Price: € 10,00
• Stock: Available in stock
TUXCase (Acme systems)
TUXCase is a TUX-shaped plastic enclosure designed to hold the Acme Systems Linux FOX Board LX. It is a perfect gadget for all Linux addicted.
• Price: € 29,00
• Stock: Available in stock
PS5V1A (Acme systems)
The PS5V1A is a switching power supply which offer a connector designed for the Fox Board. Input 100-240VAC 50/60Hz, output 5VDC/1A.
• Price: € 15,00
• Stock: Available in stock
FOX Board G20 Combo (Acme systems)
The FOX Board G20 Combo includes everything you need to build a tiny Embedded Linux Server based on the Netus G20 module. The kit includes: FOX Board G20, uSD 2GB with Debian, Lithium Battery, Debug Port Interface, FOX Case, and power supply.
• Price: € 197,00
€ 177,30
• Stock: Click to check
FOX Board G20 TUX Combo (Acme systems)
The FOX Board G20 TUX Combo offers everything you need to build a TUX-shaped Embedded Linux Server based on the Netus G20 module. The kit includes: FOX Board G20, uSD 2GB Debian, Lithium battery, Debug Port Interface, TUX Case, and power supply.
• Price: € 216,00
€ 194,40
• Stock: Click to check
FOX Board G20 Development Kit (Acme systems)
The FOX Board G20 Development Kit includes all what you need to develop with the FOX G20. The kit includes: FOX Board G20, uSD 2GB with Debian, USB consolle adapter, FOX Proto-2 and connectors, power supply and accessories.
• Price: € 197,00
€ 177,30
• Stock: Click to check
NETUS G20-L (Acme systems)
Netus G20-L is a tiny 4x4cm Linux-ready module based on the new 400MHz ARM9 CPU from Atmel (AT91SAM9G20). The Netus G20-L includes 64MB SDRAM, 256KB Flash, LAN, USB, I/O and many other powerful devices, making it perfect for any Embedded Linux application
• Price: € 65,00
• Stock: Available in stock
N60SH (Acme systems)
Set of female and male SMD connectors with 60-pin, 0.8mm pitch, designed to host the Netus G20 on a host board.
• Price: € 2,00
• Stock: Available in stock
NETUS PS1 (Acme systems)
The Netus PS1 includes all the circuitry needed to power-up the Netus G20 module, giving the three required voltages (1.0/1.8/3.3 V) in the required power-up and power-down sequences.
• Price: € 10,00
• Stock: Available in stock
NETUS G20 Development Kit (Acme systems)
The NETUS G20 DK includes all what you need to develop with the NETUS G20. The kit includes: FOX Board G20, Netus G20, NETUS power supply, uSD 2GB with Debian, RTC battery, USB consolle port, FOX prototype board, power supply and other accessories.
• Price: € 272,00
€ 244,80
• Stock: Click to check
DAISY-1 (Acme systems)
It is plugable over the NetusG20 or FOX G20 board to provides 8 connectors to plug up to 8 or more daisy modules using ribbon flat cables. Each connecgtor is identified with a unique name and has a different set of signals coming from the Atmel CPU.
• Price: € 15,00
• Stock: Available in stock
FC-19818-10P-FF (Acme systems)
20cm flat cable with sockets for Daisy wiring
• Price: € 3,00
• Stock: Available in stock
DAISY-9 (Acme systems)
The Daisy-9 is RS232 interface for DAISY series. Up to 6 modules are pluggable on a single FOX Board G20. Up to 3 modules can have the hardware handshaking enabled with RTS/CTS signals and the other 3 modules have simply the TXD and RXD signals.
• Price: € 20,00
• Stock: Available in stock
DAISY-10 (Acme systems)
is an isolated interface designed to link the FOX Board G20 with industrial devices equipped on RS485 or RS422 line bus. The board used a Texas Instruments ISO35 chip.
• Price: € 35,00
• Stock: Available in stock
DAISY-2 (Acme systems)
The Daisy-2 is a ready to use stepper motor controller that expose all the function provided by the DRV8811 chip and add also a Low-Power function.
• Price: € 45,00
• Stock: Available in stock
DAISY-4 (Acme systems)
The DAISY-4 module allows FOX Board G20 or Bee Board to control larger loads and devices. Up to 8 Daisy-4 modules can be wired using an unique flat cable.
• Price: € 25,00
• Stock: Available in stock
DAISY-5 (Acme systems)
The DAISY-5 is module intended for educational and experimental purpose with 8 push-buttons. Up to 2 DAISY-5 modules are pluggable on a single FOX Board G20 trough a DAISY-1 adapter.
• Price: € 10,00
• Stock: Available in stock
DAISY-11 (Acme systems)
The DAISY-11 is module intended for educational and experimental purpose with 8 red led. Up to 2 DAISY-11 modules are pluggable on a single FOX board G20 trough a DAISY-1 adapter.
• Price: € 10,00
• Stock: Available in stock
DAISY-22 (Acme systems)
This board is based on a PCF8574 chip, a 8-bit quasi-bidirectional port and an I2C-bus interface with low current consumption and latched outputs with high current drive capability for directly driving LEDs.
• Price: € 25,00
• Stock: Available in stock
Language
Shopping cart
Your cart is empty.
Need help?
Click here to view our F.A.Q. page or feel free to submit your question through our contact form.
Embedded World 2012
Social Media
Newsletter
Subscribe to our regular newsletter and stay informed about all of our latest offers.Shipment and Payment
Payment Methods
We accept Wire Transfer, VISA, MasterCard and PayPal. For security reasons we do not handle credit card details directly. All credit card payments are handled by a secure third party provider - Wirecard.
Shipping
By default we ship with DHL and FEDEX (insured shipment). For shipment costs to your country please check here.
Prices
All listed prices exclude Value Added Tax (VAT) and shipping cost. Customers outside the EU or companies within the EU with a valid VAT number are exempt from VAT. Companies based in Austria and private persons will have 20% VAT added to the prices at checkout.