Mikroelektronika
Development Boards
MikroElektronika is a leading manufacturer of high-quality development tools for many microcontroller families. The product line includes Basic/Pascal/C Compilers with advanced IDE and debugger, Development Boards with integrated programmer and in-circuit debugger, Programmers for in-circuit programming and debugging, extension boards for the most popular buses (LIN, CAN, Serial, Ethernet, IRDA, etc.) and devices (CF, MMC/SD, RTC, AD/DA, Display, Touch Screen, etc.).
Mikroelektronika product categories:
• Books
EasyPIC PRO v7 - MCU Card PIC18F87K22 (Mikroelektronika)
The PIC18F87K22 microcontroller for standard 104-pin MCU card for EasyPIC PRO™ v7 with 80-pin TQFP MCU packaging and 100mil pin distance.
• Price: € 18,90
• Stock: Available in stock
ADC Click (Mikroelektronika)
The ADC Click is build around the MCP3204 which features 12-bit ADC with 4 inputs (with screw terminals), 50k samples/s and low-power consumption. Board uses SPI interface and it is set to use 3,3V power supply by default. Can be set to 5V systems, too.
• Price: € 20,00
• Stock: Available in stock
EasyPIC PRO v7 - MCU Card PIC18F8722 (Mikroelektronika)
The PIC18F8722 microcontroller for standard 104-pin MCU card for EasyPIC PRO™ v7 with 80-pin TQFP MCU packaging and 100mil pin distance.
• Price: € 18,90
• Stock: Available in stock
Bluetooth Click (Mikroelektronika)
The Bluetooth Click is a fully qualified, class 1, Bluetooth 2.1 module for mikroBus form factor. The board features: low power (30mA), high data rate (up to 300Kbs), UART (SPP or HCI) data connection interface. It uses 3,3V power supply only.
• Price: € 36,00
• Stock: Available in stock
DIGIPOT Click (Mikroelektronika)
The DIGIPOT Click is an accessory board in mikroBus™. It features a single-channel digital potentiometer MCP4161 with 8-bit resolution and SPI interface. The resistance value of the DIGIPOT goes up to 10 kΩ and it can be used both 3,3V and 5V systems
• Price: € 14,50
• Stock: Available in stock
EasyPIC PRO v7 - MCU Card PIC18F87J50 USB (Mikroelektronika)
The PIC18F87J50 with USB support microcontroller for standard 104-pin MCU card for EasyPIC PRO™ v7 with 80-pin TQFP MCU packaging and 100mil pin distance.
• Price: € 18,90
• Stock: Available in stock
EasyPIC PRO v7 - MCU Card PIC18F8520 (Mikroelektronika)
The PIC18F8520 microcontroller for standard 104-pin MCU card for EasyPIC PRO™ v7 with 80-pin TQFP MCU packaging and 100mil pin distance.
• Price: € 16,90
• Stock: Available in stock
EasyPIC PRO v7 - MCU Card PIC18F87J60 ETH (Mikroelektronika)
The PIC18F87J60 with ETH support microcontroller for standard 104-pin MCU card for EasyPIC PRO™ v7 with 80-pin TQFP MCU packaging and 100mil pin distance.
• Price: € 18,90
• Stock: Available in stock
ETH Click (Mikroelektronika)
The ETH Click for mikroBus features the Microchip ENC28J60 a 28-pin, 10BASE-T standalone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. The board is designed to use 3,3V power supply only.
• Price: € 21,00
• Stock: Available in stock
microSD Click (Mikroelektronika)
The microSD Click provides an easy way to add microSD (Micro Secure Digital cards) socket to mikroBus. The board includes the microSD socket as well as all the passive components. Board is designed to use 3,3V power supply only
• Price: € 13,50
• Stock: Available in stock
RS485 Click 5V (Mikroelektronika)
RS485 Click 5V is an accessory board in mikroBus. It allows high speed bidirectional data communication on multipoint bus transmission lines. It complies with EIA standards RS-485 and RS-422. The board operates on 5V power supply only.
• Price: € 14,00
• Stock: Available in stock
BUZZ Click (Mikroelektronika)
The BUZZ Click is an accessory board in mikroBus. The Board features a piezo speaker capable of emitting audio signals. Buzzer’s resonant frequency is 3,8kHz. The board is set to use 5V power supply by default but it can be used with 3,3V systems, too.
• Price: € 7,70
• Stock: Available in stock
MP3 Click (Mikroelektronika)
The MP3 Click is an accessory board in mikroBus form. A stereo MP3 decoder chip VS1053 can decode and encode multiple formats. It uses SPI interface and can only use 3,3V power supply. The board features stereo headphone and microphone audio connectors.
• Price: € 18,50
• Stock: Available in stock
RTC Click (Mikroelektronika)
The RTC Click is a real-time clock board using mikroBus form factor. It features the PCF8583 serial real-time clock with a 3V/230mA lithium battery as a backup. The board is set to use 3,3V power supply by default but it can be used in 5V systems, too
• Price: € 17,90
• Stock: Available in stock
RTC2 Click (Mikroelektronika)
The RTC2 Click is a real-time clock board using mikroBus. It is full BCD with programmable square-wave output signal. It features the DS1307 serial real-time clock with a 3V/230mA lithium battery as a backup. The board can only use 5V power supply.
• Price: € 17,90
• Stock: Available in stock
GPS Antenna (V-Torch)
Waterproof active GPS antenna with magnetic base, 2 meters length cable with SQA connector.
• Price: € 8,90
• Stock: Available in stock
SHT11 Click (Mikroelektronika)
The SHT11 Click is a digital humidity and temperature sensor in mikroBus form. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. It can be used both 3,3V and 5V systems.
• Price: € 21,00
• Stock: Available in stock
DAC Click (Mikroelektronika)
The DAC Click is an accessory board in mikroBus™ form factor. The board featuring the Microchip MCP4921 12-bit digital-to-analog converter with SPI interface. The board is set to use 3,3V power supply by default and it can be used with 5,0V systems, too.
• Price: € 15,50
• Stock: Available in stock
EXPAND Click (Mikroelektronika)
It is a 16-bit I/O expander accessory board in mikroBus with SPI clock speeds up to 10MHz. Three jumpers allow you to configure board address and connect up to 8 devices on the bus. It supports interrupt-on-change feature and can be used 3,3/5V systems.
• Price: € 10,50
• Stock: Available in stock
Bee Click (Mikroelektronika)
The Bee Click is an accessory board in mikroBus. It features 2.4 GHz IEEE 802.15.4 radio transceiver module MRF24J40MA, with integrated PCB antenna and matching circuitry. Board is designed to use 3,3V power supply only.
• Price: € 25,70
• Stock: Available in stock
RS485 Click 3,3V (Mikroelektronika)
RS485 Click 3,3V is an accessory board in mikroBus. It allows high speed bidirectional data communication on multipoint bus transmission lines. It complies with EIA standards RS-485 and RS-422. The board operates on 3,3V power supply only.
• Price: € 15,90
• Stock: Available in stock
LightHz Click (Mikroelektronika)
LightHz Click is an accessory board in mikroBus, featuring TSL230BR programmable light-to-frequency converter. The output can be either a pulse train or a square wave. Device sensitivity is selectable in three ranges and it can be used 3,3/5V systems.
• Price: € 15,80
• Stock: Available in stock
CAN SPI Click 3,3V (Mikroelektronika)
The CAN SPI Click 3,3V is an accessory board in mikroBus to add CAN connectivity to your microcontroller with SPI. Board features SN65HVD230 circuit which provides CAN serial communication physical layer in accordance with the ISO 11898 standard.
• Price: € 18,60
• Stock: Available in stock
CAN SPI Click 5V (Mikroelektronika)
The CAN SPI Click 5V is an accessory board in mikroBus to add CAN connectivity to your microcontroller with SPI. Board features SN65HVD230 circuit which provides CAN serial communication physical layer in accordance with the ISO 11898 standard.
• Price: € 18,60
• Stock: Available in stock
GPS Click (Mikroelektronika)
The GPS Click is an accessory board in mikroBus form factor with high performance u-blox 6 positioning engine, LEA-6S. It can be interfaced with a microcontroller through UART or I2C connection, or USB connection. It running on 3,3V power supply only.
• Price: € 42,00
• Stock: Available in stock
EasyPIC v7 (Mikroelektronika)
The EasyPIC v7 is a full-featured development board for Microchip 8/14/18/20/28/40-pin PIC microcontrollers. The EasyPIC includes: touch-screen controller, USB2.0 programmer and ICD, on-board LED display, LCD interfaces, and many others useful devices.
• Price: € 124,00
• Stock: Available in stock
Analog System Lab Kit PRO (Mikroelektronika)
The Analog System Lab Kit PRO has been designed for undergraduate engineering students to perform analog lab experiments. The board contains ten basic groups of analog components.
• Price: € 129,00
• Stock: Estimated date of availability 21.05.2012
PIC-Ready2 Board (Mikroelektronika)
The PIC-Ready2 Board is an hi-quality prototype Board, with on-board USB-serial adapter (FT232R), for 18 pin Microchip PIC microcontrollers. It is compatible with all the Mikroelektronika accessories, allowing fast and easy prototypes development.
• Price: € 24,00
• Stock: Available in stock
Ready for PIC Board (Mikroelektronika)
Ready for PIC is the board for development of microcontroller applications using 28- and 40-pin PIC MCUs. It comes with PIC16F887. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit.
• Price: € 26,00
• Stock: Available in stock
Ready for PIC Plastic Case (white) (Mikroelektronika)
Put your Ready for PIC in hi-quality white plastic casing and you’ve got yourself a final product! The Ready for PIC is specially designed to fit perfectly inside. The case comes with holes for Power supply and USB cables.
• Price: € 20,00
• Stock: Available in stock
Language
Shopping cart
Your cart is empty.
Need help?
Click here to view our F.A.Q. page or feel free to submit your question through our contact form.
Social Media
Newsletter
Subscribe to our regular newsletter and stay informed about all of our latest offers.Shipment and Payment
Payment Methods
We accept Wire Transfer, VISA, MasterCard and PayPal. For security reasons we do not handle credit card details directly. All credit card payments are handled by a secure third party provider - Wirecard.
Shipping
By default we ship with DHL and FEDEX (insured shipment). For shipment costs to your country please check here.
Prices
All listed prices exclude Value Added Tax (VAT) and shipping cost. Customers outside the EU or companies within the EU with a valid VAT number are exempt from VAT. Companies based in Austria and private persons will have 20% VAT added to the prices at checkout.