Articles and Demos
Here you can find an ever expanding series of articles and demos with interesting technical information that may prove useful for your project.
If you have an article or a demo of your own that you would like to feature on this page, please feel free to contact us with a suggestion.
We are very happy to publish anything creative and interesting built with and written about the product lines we carry.
What is eMMC?
eMMC (embedded multimedia card) is an embedded non-volatile memory system, comprised of both flash memory and a flash memory controller integrated on the same silicon die. Learn more »
• Linked to product: eMMC Protocol Analyzer
• Linked to brand: Zeroplus
Axon 3 Ushers in a new Era of 3D Printing
The specifically optimized build profiles of Axon 3 for the 3D Touch personal printers enable fast slicing, sharp corners, smooth faces and fine details. And last but not least, printing in 3 colors simultaneously is now a breeze. Learn more »
• Linked to product: 3DTouch triple head 3D printer
• Linked to brand: Bits from Bytes
Axon Gets and upgrade! Axon 2.1 now available!
Axon, the 3D Slicing software from Bits from Bytes gets an upgrade of many improvements, such as raftless printing, increased speed, layer thickness variation for better surface quality and more... Learn more »
• Linked to product:
• Linked to brand: Bits from Bytes
Let´s make: Programmable Relay Timers (AVR)
Build your own programmable timer relays using AVR-Ready1, Keypad 4x4 board with EasyPull, RTC, Relay 4 and LCD 2x16 character display with adapter. Just load the demonstration project code and your device is ready to control 4 separate relays. Learn more »
• Linked to product: Programmable Relay Timers Kit
• Linked to brand: Mikroelektronika
Zeroplus eMMC Technology Application Note
In recent years, smart phones, tablets and notebooks have developed very quickly, requiring a large number of traditional multi-chip packaging (MCP) and eMMC. This application note shows how to use the new Zeroplus eMMC protocol analyzer.
Learn more »
Learn more »
• Linked to product: eMMC Protocol Analyzer
• Linked to brand: Zeroplus
3D Printing Goes Hollywood With Stop-Motion Animated Feature ParaNorman
Have a look at this very interesting feature in Wired magazine about how 3D Printing is changing stop motion animation. The 3D Systems ZPrinter 650 was used to print thousands of character faces for the film. Learn more »
• Linked to product:
• Linked to brand:
Let´s make: WiFi Control Demo
MikroE has reated Let's Make project with EasyPIC v7, mikromedia for PIC18FJ, mikroBUS shield and two WiFi PLUS Click boards. Code is written in mikroC, mikroBasic and mikroPascal PRO for PIC compilers. GUI on mikromedia is built with Visual TFT. Learn more »
• Linked to product: Wifi Control Kit
• Linked to brand: Mikroelektronika
4D Systems ViSi Walkthrough Video Tutorial
4D-ViSi is the latest software tool from 4D Systems that allows quick development through the ability to place objects on a simulated display throughout the coding phase. Learn more »
• Linked to product:
• Linked to brand: 4D Systems
Integrating AT-MINI bootloader in mikroElektronika AVR compilers
AT-MINI is shipped preprogrammed with an open source bootloader from AVRdude which is the same one used in Arduino. Watch a short video on how to integrate the bootloader application in mikroElektronika compiler’s IDE. Learn more »
• Linked to product: AT-Mini Board 5V
• Linked to brand: Mikroelektronika
MP3 Player example using the mikroMMB for dsPIC33.
This is the first thing that came to our mind when we thought of mikroMMB for dsPIC33. A fancy touch-controlled MP3 player. So, we took a little time to make this thought a reality. GUI was created in mikroElektronika Visual TFT upcoming software. Learn more »
• Linked to product: mikromedia for dsPIC33
• Linked to brand: Mikroelektronika
Under (distilled) water Led Blinking.
We are planing to conduct a mad science project of overclocking dsPIC microcontroller to 200MHz. Yes, that's a lot of MIPS :-). However, we are going to try whether a simple LED Blinking can run under extreme overclocking conditions. Learn more »
• Linked to product: PIC-Ready1 Board with Bootloader
• Linked to brand: Mikroelektronika
Raining Code Example (from the movie "The Matrix") with mikroMMB for dsPIC33.
Morpheus: The matrix is everywhere, its all around us, even now in this very room. You can see it when you look out your window or when you turn on your mikroMMB for dsPIC33. Learn more »
• Linked to product: mikroC PRO for dsPIC (USB Dongle)
• Linked to brand: Mikroelektronika
mikroBootloader for Linux from MikroElektronika.
mikroBootloader for PIC-Ready1 and Xmega-Ready boards just got it's Linux version. So all of you Linux lovers can now put down your Virtual Machines to rest, and enjoy all the benefits of Linux-native mikroBootloader application. Learn more »
• Linked to product: XMEGA-Ready Board
• Linked to brand: Mikroelektronika
Solar Powered mikroMMB for dsPIC33
We have been testing the possibility of powering mikroMMB boards with Solar energy. Having 4 solar panels connected in parallel, each giving 4,5V with maximum of 80mA, we have achieved some great results. Learn more »
• Linked to product: mikromedia for dsPIC33
• Linked to brand: Mikroelektronika
Interesting project: Digital Poi Spinning (Persistence of Vision Display)
Andrew Hazelden, used mikroC PRO for PIC to create Digital Persistence of Vision Spinning Display. He says that it was a weekend project to get the prototype running. The device is amazingly cool! Learn more »
• Linked to product: mikroC PRO for PIC (USB dongle)
• Linked to brand: Mikroelektronika
How Fast is PIC32 compared to dsPIC33?
Well, we asked this question too, so we did a little experiment. Remember the Matrix Code example written for mikroMMB for dsPIC33? With a few initialization changes we ported the code easily for PIC32, running on LV-32MX v6. Learn more »
• Linked to product: LV-32MX v6
• Linked to brand: Mikroelektronika
Language
Shopping cart
Your cart is empty.
Need help?
Click here to view our F.A.Q. page or feel free to submit your question through our contact form.
Social Media
Newsletter
Subscribe to our regular newsletter and stay informed about all of our latest offers.Shipment and Payment
Payment Methods
We accept Wire Transfer, VISA, MasterCard and PayPal. For security reasons we do not handle credit card details directly. All credit card payments are handled by a secure third party provider - Wirecard.
Shipping
By default we ship with DHL and FEDEX (insured shipment). For shipment costs to your country please check here.
Prices
All listed prices exclude Value Added Tax (VAT) and shipping cost. Customers outside the EU or companies within the EU with a valid VAT number are exempt from VAT. Companies based in Austria and private persons will have 20% VAT added to the prices at checkout.