TIGAL - VRbot (Speech recognition module for robots)

Products by category

Text search

List of brands

Fast search

VRbot

» Speech recognition module for robots

(Click on image to enlarge)

VRbot Module is designed to easily add versatile voice command functionality to robots, in particular ROBONOVA-I and ROBOZAK.
The VRbot module provides users with a host of built-in Speaker Independent (SI) commands that will allow basic control of the Robot movement straight out-of-the-box. In addition, users have the possibility to configure up to 32 user-defined Speaker Dependent (SD) triggers or commands to control their ROBONOVA and ROBOZAK robots.

Features:

A host of built-in speaker independent (SI) commands (available in US English, German, Italian and Japanese) for ready to run basic controls.
Supports up to 32 user-defined Speaker Dependent (SD) triggers or commands (any language) as well as Voice Passwords.
Easy-to-use and simple Graphical User Interface to program Voice Commands to your robot.
Languages currently supported for SI commands: English U.S., Italian, Japanese and German. More languages available in the near future.
Works with Robonova and Robozak MR-C3024 controller boards.
Module can be used with any host with an UART interface (powered at 3.3V - 5V) .
Simple and robust serial protocol to access and program the module through the host board.

All of the VRbot functionality can easily be accessed from the MR-C3024 controller board through a simple, yet robust serial protocol. All you need to do is connect the VRbot module to your ROBONOVA or ROBOZAK board, connect your robot to a PC, power up, and you are ready to go. You will not have to worry about needing additional adapter boards.
Upon power up, the supplied VRbotGUI software automatically downloads a roboBASIC bridge program to the controller board, which will allow immediate voice control of the robot with the built-in SI command set.
The bridge program also enables programming of the speaker dependent commands into VRbot by using the PC interface. After creating and training all desired commands in the VRbotGUI, users can create a basic template program, open it in the roboBASIC editor and assign specific behavior to each command. This can finally be downloaded and run on the ROBONOVA controller essentially giving your robot the ability to listen and adhere to your voice commands.